Specifications

Menu Name Function Description GPIB Mnemonic
ADAPTER
REMOVAL
12-TERM CAL X AND Y
MUST EXIST IN THE
CURRENT DIRECTORY
None
ELECTRICAL LENGTH
OF THE ADAPTER
XXX.XXX ps
Displays the electrical length of the adapter. The
value of the electrical length is used when the two
calibrations are merged. It has the same range as the
time delay for reference plane extension and a
default value of 0.0000 ps.
ADPL; ADPL?
REMOVE ADAPTER Changes the soft-key display to the next ADAPTER
REMOVAL menu.
LDARF; IARF
HELP ON/OFF Displays an informational help screen. HELP1; HELP0;
HELPX?
RETURN Returns to the previous soft-key menu. None
ADAPTER
REMOVAL 2
RECALL FROM DISK
THE CALIBRATION FILE
OF THE X TEST PORT
(ADAPTER ON PORT2)
None
HARD DISK Changes the soft-key display to the next SELECT
FILE TO READ menu.
LDARF; IARF
FLOPPY DISK LDARF; IARF
RETURN Returns to the previous soft-key menu. None
ADAPTER
REMOVAL 3
RECALL FROM DISK
THE CALIBRATION FILE
OF THE Y TEST PORT
(ADAPTER ON PORT1)
None
HARD DISK Changes the soft-key display to the next SELECT
FILE TO READ menu.
LDARF; IARF
FLOPPY DISK LDARF; IARF
RETURN Returns to the previous soft-key menu. None
AUTOCAL
PLEASE CONNECT
THE AUTOCAL
MODULE.
None
MEASURE DEVICE(S) Start processing the measurement and changes
soft-key display to the AUTOCAL 2 menu.
BEGAC
RETURN Returns to the previous soft-key menu. None
AUTOCAL 2
MEASURING... None
RETURN Aborts the calibration. Changes the soft-key display
to the PERFORM AUTOCAL menu.
ABORTCAL
AUTOCAL 3
SAVE Changes the soft-key display to the SAVE menu. SAVE
EXIT CAL Exit AutoCal without saving calibration data to disk. ABORTCAL
CAL FRONT PANEL
KEY MENUS OPERATION
4-136 MS462XX OM