Specifications

Menu Name Function Description GPIB Mnemonic
AUTOCAL 4
SELECT CALIBRATION
TYPE
None
FULL 2 PORT Selects a traditional 2-port
Short-Open-Load-Thru(SOLT) calibration.
ACSF2P; ACX?
FULL 3 PORT Selects a traditional 3-port
Short-Open-Load-Thru(SOLT) calibration.
ACSF3P; ACX?
FULL 4 PORT Selects a traditional 4-port
Short-Open-Load-Thru(SOLT) calibration.
ACSF4P; ACX?
REFLECTION ONLY None
S11 REFL. Selects S11 1-port calibration of port 1. ACS11; ACX?
S22 REFL. Selects S22 1-port calibration of port 2. ACS22; ACX?
2 PORT REFL.
(S11, S22)
Selects S11 and S22 2-port calibration and changes
soft-key display to the AUTOCAL menu.
ACS11S22; ACX?
ADAPTER REMOVAL Selects calibrations on male-male or female-female
test port cables. In addition to the calibrator module,
an adapter is needed for this kind of calibration.
ACADR; ACX?
RETURN Returns to the PERFORM AUTOCAL menu. None
AUTOCAL 5
Displayed only when performing and AutoCal adapter removal.
REVERSE THE VNMS
CONNECTIONS TO THE
AUTO-CAL MODULE
None
LEAVE THE ADAPTER
ON THE SAME PORT
OF AUTO-CAL MODULE
None
MEASURE DEVICE(S) Starts processing the measurement and changes
soft-key display to the AUTOCAL 2 menu.
BEGAC
RETURN Aborts the adapter removal calibration. Changes the
soft-key display to the PERFORM AUTOCAL menu.
None
AUTOCAL 6
CONNECT ISOLATION
STANDARDS TO VNA
None
OR None
DISCONNECT ONE
CABLE FROM THE
AUTO-CAL MODULE
None
MEASURE DEVICE(S) Starts processing the measurement and changes
soft-key display to the AUTOCAL 2 menu.
BEGAC
RETURN Aborts the adapter removal calibration. Changes the
soft-key display to the PERFORM AUTOCAL menu.
None
AUTOCAL 7
CONNECT A THRU
LINE BETWEEN PORT 1
AND 2
None
MEASURE DEVICE(S) Starts processing the measurement and changes
soft-key display to the AUTOCAL 2 menu.
BEGAC
RETURN Returns to the previous soft-key menu. None
FRONT PANEL CAL
OPERATION KEY MENUS
MS462XX OM 4-137