Specifications

Menu Name Function Description GPIB Mnemonic
CHANGE LRL/LRM
PARAMETERS2
CHARACTERIZE
CAL DEVICES
None
DEVICE 1
LINE 1 (REF)
X.XXXX mm
Enter length of line 1. LL1; LL1?
DEVICE 2
LINE/MATCH
X.XXXX mm/FULLBAND
Select device 2—LINE or MATCH; if line is selected,
enter length.
LL2; LM2; LX2?;
LL2?
DEVICE 3
LINE/MATCH
X.XXXX mm/HIGHBAND
Only if two bands
Select device 3—LINE or MATCH; if line is selected,
enter length.
LL3; LM3; LX3?;
LL3?
FREQ AFTER WHICH
THE USE OF DEVICE 2
AND DEVICE 3 IS
EXCHANGED
None
BREAKPOINT
XXX.XXXXXXXX GHz
Enter breakpoint frequency: end of band 1, beginning
of band 2.
BPF; BPF?
NEXT CAL STEP Changes the soft-key display to the next soft-key
menu in calibration sequence. Refer to Appendix D
for menu flow.
None
CHANGE LRL/LRM
PARAMETERS3
OFFSET LENGTH
OF REFLECTIVE
DEVICE
None
OFFSET LENGTH
X.XXXX mm
Enter the offset length of the reflective device. ROL; ROL?
TYPE OF
REFLECTION
None
OPEN
(GREATER THAN Zo)
Specifies the reflection to have an impedance value
greater than the reference impedance (Zo). This is
typically an open device.
RGZ; RXZ?
SHORT
(LESS THAN Zo)
Selects the reflection to have an impedance value
less than the reference impedance (Zo). This is
typically a short device.
RLZ; RXZ?
NEXT CAL STEP Changes the soft-key display to the next soft-key
menu in calibration sequence. Refer to Appendix D
for menu flow.
None
CHANGE
PARAMETERS
CHARACTERIZE
CAL DEVICES
None
DEVICE 1
LINE 1 (REF)
X.XX mm
Enter length of line 1. LL1; LL1?
DEVICE 2
LINE MATCH
X.XX mm/FULLBAND
Select device 2—LINE or MATCH; if line is selected,
enter length.
LL2; LL2?
NEXT CAL STEP Changes the soft-key display to the next soft-key
menu in calibration sequence. Refer to Appendix D
for menu flow.
None
CAL FRONT PANEL
KEY MENUS OPERATION
4-148 MS462XX OM