Specifications

Menu Name Function Description GPIB Mnemonic
CHANGE
PARAMETERS2
CHARACTERIZE
CAL DEVICES
None
DEVICE 1 P3-P1
LINE LENGTH
X.XX mm
Sets device 1 line length. LL1P3; LL1P3?
DEVICE 3 P3-P2
LINE LENGTH
X.XX mm
Sets device 3 line length. LL2P3; LL2P3?
NEXT CAL STEP Changes the soft-key display to the next soft-key
menu in calibration sequence. Refer to Appendix D
for menu flow.
None
CHANGE
PARAMETERS3
OFFSET LENGTH OF
REFLECTIVE DEVICE
None
OFFSET LENGTH
X.XX mm
Enter reflection device offset length for 3-port TRX
calibration.
ROLP3; ROLP3?
NEXT CAL STEP Changes the soft-key display to the next soft-key
menu in calibration sequence. Refer to Appendix D
for menu flow.
None
CONFIRM
CALIBRATION
PARAMETERS
(STANDARD
COAXIAL)
PORT 1 CONN
XXXXXXXXXXX
Displays current connector type and changes soft-key
display to one of the SELECT PORT X CONNECTOR
TYPE menus.
P1C; P1C?
PORT 2 CONN
XXXXXXXXXXX
Displays current connector type and changes soft-key
display to one of the SELECT PORT X CONNECTOR
TYPE menus.
P2C; P2C?
REFLECTION PAIRING
XXXX
Changes the soft-key display to the SELECT
REFLECTION PAIRING menu.
MIX; MAT; MIX?
LOAD TYPE
XXXX
Changes the soft-key display to the SELECT TYPE
OF LOAD menu.
BBL; SLD; BBX?
THROUGH LINE
PARAMETERS
or units with Option 24:
THRU/RECIPROCAL
PARAMETERS
Changes the soft-key display to the ENTER THE
THROUGH LINE PARAMETERS menu.
Changes the soft-key display to the
THRU/RECIPROCAL PARAMETERS menu.
None
REFERENCE
IMPEDANCE
Changes the soft-key display to the ENTER
REFERENCE IMPEDANCE menu.
None
TEST SIGNALS Changes the soft-key display to the TEST SIGNALS
menu.
None
START CAL Changes the soft-key display to the next soft-key
menu in calibration sequence. Refer to Appendix D
for menu flow.
BEG
FRONT PANEL CAL
OPERATION KEY MENUS
MS462XX OM 4-149