Specifications

Menu Name Function Description GPIB Mnemonic
CONFIRM
CALIBRATION
PARAMETERS2
(STANDARD
MICROSTRIP)
PORT 1
OPEN/SHORT
Changes the soft-key display to the PORT X OPEN
DEVICE menu.
None
PORT 2
OPEN/SHORT
Changes the soft-key display to the PORT X OPEN
DEVICE menu.
None
REFLECTION
PAIRING
XXXX
Changes the soft-key display to the SELECT
REFLECTION PAIRING menu.
MIX; MAT; MIX?
LOAD
IMPEDANCE
Changes the soft-key display to the BROADBAND
LOAD PARAMETERS menu.
None
THROUGH LINE
PARAMETERS
or units with Option 24:
THRU/RECIPROCAL
PARAMETERS
Changes the soft-key display to the ENTER THE
THROUGH LINE PARAMETERS menu.
Changes the soft-key display to the
THRU/RECIPROCAL PARAMETERS menu.
None
MICROSTRIP
PARAMETERS
XXXXXXXXXXX
Changes the soft-key display to the SELECT
MICROSTRIP KIT TO USE menu.
U10; U15; U25;
UTFD; UTFX?
TEST SIGNALS Changes the soft-key display to the TEST SIGNALS
menu.
None
START CAL Changes the soft-key display to the next soft-key
menu in calibration sequence. Refer to Appendix D
for menu flow.
BEG
CONFIRM
CALIBRATION
PARAMETERS3
(OPEN SHORT
COAXIAL)
OFFSET LENGTHS
OF SHORTS
Changes the soft-key display to the ENTER OFFSET
LENGTHS OF SHORTS menu.
None
LOAD TYPE
IMPEDANCE
Changes the soft-key display to the SELECT TYPE
OF LOAD menu.
BBL; SLD; BBX?
THROUGH LINE
PARAMETERS
or units with Option 24:
THRU/RECIPROCAL
PARAMETERS
Changes the soft-key display to the ENTER THE
THROUGH LINE PARAMETERS menu.
Changes the soft-key display to the
THRU/RECIPROCAL PARAMETERS menu.
None
REFERENCE
IMPEDANCE
Changes the soft-key display to the ENTER
REFERENCE IMPEDANCE menu.
None
TEST SIGNALS Changes the soft-key display to the TEST SIGNALS
menu.
None
START CAL Changes the soft-key display to the next soft-key
menu in calibration sequence. Refer to Appendix D
for menu flow.
BEG
CAL FRONT PANEL
KEY MENUS OPERATION
4-150 MS462XX OM