Specifications

Menu Name Function Description GPIB Mnemonic
CONFIRM
CALIBRATION
PARAMETERS7
(LRL/LRM
MICROSTRIP)
LRL/LRM PARAMETERS Changes the soft-key display to the CHANGE
LRL/LRM PARAMETERS menu.
None
MICROSTRIP
PARAMETERS
XXXXXXXXXXX
Changes the soft-key display to the SELECT
MICROSTRIP KIT TO USE menu.
U10; U15; U25;
UTFD; UTFX?
TEST SIGNALS Changes the soft-key display to the TEST SIGNALS
menu.
None
START CAL Changes the soft-key display to the next soft-key
menu in calibration sequence. Refer to Appendix D
for menu flow.
BEG
CONFIRM
CALIBRATION
PARAMETERS8
(LRL/LRM
WAVEGUIDE)
LRL/LRM PARAMETERS Changes the soft-key display to the CHANGE
LRL/LRM PARAMETERS menu.
None
WAVEGUIDE
CUTOFF FREQ
Changes the soft-key display to the ENTER
WAVEGUIDE FREQUENCY menu.
None
TEST SIGNALS Changes the soft-key display to the TEST SIGNALS
menu.
None
START CAL Changes the soft-key display to the next soft-key
menu in calibration sequence. Refer to Appendix D
for menu flow.
BEG
CONFIRM
CALIBRATION
PARAMETERS9
CHANGE
PARAMETERS
Changes the soft-key display to the CHANGE
PARAMETERS menu.
None
START CAL Changes the soft-key display to the first 3 PORT
CALIBRATION menu.
BEG
CONFIRM
CALIBRATION
PARAMETERS10
PORT 3 CONN
XXXXXXXXX
Changes the soft-key display to the SELECT PORT 3
CONNECTOR TYPE menu.
P3C; P3C?
LOAD TYPE
XXXXXXXXXX
Changes the soft-key display to the SELECT TYPE
OF LOAD menu.
BBLD3; SLDP3;
BBXP3?
THROUGH LINE
PARAMETERS
or units with Option 24:
THRU/RECIPROCAL
PARAMETERS
Changes the soft-key display to the ENTER THE
THROUGH LINE PARAMETERS menu.
Changes the soft-key display to the
THRU/RECIPROCAL PARAMETERS menu.
None
START CAL Changes the soft-key display to the next soft-key
menu in calibration sequence. Refer to Appendix D
for menu flow.
BEG3P
CONFIRM
CALIBRATION
PARAMETERS11
PORT 4 CONN
XXXXXXXXX
Changes the soft-key display to the SELECT PORT 4
CONNECTOR TYPE menu.
P4C; P4C?
LOAD TYPE
XXXXXXXXXX
Changes the soft-key display to the SELECT TYPE
OF LOAD menu.
BBLD4; SLDP4;
BBXP4?
THROUGH LINE
PARAMETERS
or units with Option 24:
THRU/RECIPROCAL
PARAMETERS
Changes the soft-key display to the ENTER THE
THROUGH LINE PARAMETERS menu.
Changes the soft-key display to the
THRU/RECIPROCAL PARAMETERS menu.
None
START CAL Changes the soft-key display to the next soft-key
menu in calibration sequence. Refer to Appendix D
for menu flow.
BEG3P
CAL FRONT PANEL
KEY MENUS OPERATION
4-152 MS462XX OM