Specifications

Menu Name Function Description GPIB Mnemonic
DISPLAY
INSTALLED TEST
PORT CONNECTOR
INFO 5
SPECIAL (M) Displays coefficient data for the SPECIAL connector
male components.
DMSP
SPECIAL (F) Displays coefficient data for the SPECIAL connector
female components.
DFSP
NEXT CONNECTOR Cycle through selections SPECIAL (M) to SPECIAL
(F).
None
MORE Changes the soft-key display to the DISPLAY
INSTALLED TEST PORT CONNECTOR INFO menu.
None
RETURN Returns to the previous soft-key menu. None
ENTER
MICROSTRIP
PARAMETERS
WIDTH OF
STRIP
XX.XXXX mm
Enter the width of the microstrip. USW; USW?
THICKNESS OF
SUBSTRATE
XXXX.XXXX mm
Enter the thickness of the substrate. SBT; SBT?
Zc
XXX.XXX {SYM}W
Enter the characteristic impedance of the microstrip. USZ; USZ?
SUBSTRATE
DIELECTRIC
XX.XX
Enter the relative dielectric constant of the substrate. SBD; SBD?
EFFECTIVE
DIELECTRIC
XX.XX
(RECOMMENDED
1.01)
Enter the effective dielectric constant of the
microstrip. A recommended value will also be
displayed.
USE; USE?
NEXT CAL STEP Changes the soft-key display to the CONFIRM
CALIBRATION PARAMETERS menu.
None
ENTER OFFSET
LENGTHS OF
SHORTS
IF USING ONLY TWO
SHORTS, PORT 2
OFFSETS SHOULD
EQUAL PORT 1
OFFSETS
None
PORT 1 SHORTS None
SHORT 1
XX.XXXX mm
Enter the length that Short 1 is offset from the
reference plane.
SH1; SH1?
SHORT 2
XX.XXXX mm
Enter the length that Short 2 is offset from the
reference plane.
SH2; SH2?
PORT 2 SHORTS None
SHORT 1
XX.XXXX mm
Enter the length that Short 1 is offset from the
reference plane.
SH1; SH1?
SHORT 2
XX.XXXX mm
Enter the length that Short 2 is offset from the
reference plane.
SH2; SH2?
NEXT CAL STEP Changes the soft-key display to the CONFIRM
CALIBRATION PARAMETERS menu.
None
ENTER
REFERENCE
IMPEDANCE
REFERENCE
IMPEDANCE
XXXX{SYM}W
Enter the reference impedance. LLZ; LLZ?
NEXT CAL STEP Changes the soft-key display to the CONFIRM
CALIBRATION PARAMETERS menu.
None
FRONT PANEL CAL
OPERATION KEY MENUS
MS462XX OM 4-157