Specifications

Menu Name Function Description GPIB Mnemonic
SELECT PORT X
CONNECTOR
TYPE3
TNC (M) Sets port x to be male TNC connector. CMC; P1C?; P2C?
TNC (F) Sets port x to be female TNC connector. CFC; P1C?; P2C?
2.4 mm (M) Sets port x to be male 2.4 mm connector. CM2; P1C?; P2C?
2.4 mm (F) Sets port x to be female 2.4 mm connector. CF2; P1C?; P2C?
USER DEFINED Changes the soft-key display to the PORT X OPEN
DEVICE menu.
CND; P1C?; P2C?
MORE Changes the soft-key display to the next SELECT
PORT X CONNECTOR TYPE menu.
None
SELECT PORT X
CONNECTOR
TYPE4
TYPE N (M) 75 Ohm Sets port x to be male Type N 75 Ohm connector. CMN75; P1C?;
P2C?
TYPE N (F) 75 Ohm Sets port x to be female Type N 75 Ohm connector. CFN75; P1C?;
P2C?
7/16 (M) Sets port x to be male 7/16 connector. CM716
7/16 (F) Sets port x to be female 7/16 connector. CF716
SPECIAL (M) Sets port x to be male Special connector. CMSP; P1C?; P2C?
SPECIAL (F) Sets port x to be female Special connector. CFSP; P1C?; P2C?
USER DEFINED Changes the soft-key display to the PORT X OPEN
DEVICE menu.
CND; P1C?; P2C?
MORE Changes the soft-key display to the next SELECT
PORT X CONNECTOR TYPE menu.
None
SELECT FILE TO
READ
FILE 1 Sets port x to be male Type N 75 Ohm connector. CMN75; P1C?;
P2C?
FILE 2 Sets port x to be female Type N 75 Ohm connector. CFN75; P1C?;
P2C?
FILE 3 Sets port x to be male Special connector. CMSP; P1C?; P2C?
FILE 4 Sets port x to be female Special connector. CFSP; P1C?; P2C?
PREVIOUS PAGE Returns to the previous page of file names. None
NEXT PAGE Advances to the next page of file names. None
RETURN Returns to first NETWORK EXTRACTION menu. None
SELECT
MICROSTRIP KIT
TO USE
10 MIL KIT Selects parameters for 10 mil UTF kit. U10; UTFX?
15 MIL KIT Selects parameters for 15 mil UTF kit. U15; UTFX?
25 MIL KIT Selects parameters for 25 mil UTF kit. U25; UTFX?
USER DEFINED Changes the soft-key display to the ENTER
MICROSTRIP PARAMETERS menu.
UTFD; UTFF?
SELECT
REFLECTION ONLY
CALIBRATION
TYPE
PORT 1 ONLY
(S11)
Changes the soft-key display to the SELECT
CALIBRATION DATA POINTS menu.
CRF; CXX?
PORT 2 ONLY
(S22)
Changes the soft-key display to the SELECT
CALIBRATION DATA POINTS menu.
CRR; CXX?
BOTH PATHS
(S11, S22)
Changes the soft-key display to the SELECT
CALIBRATION DATA POINTS menu.
CRB; CXX?
SELECT
REFLECTION
PAIRING
MIXED
(OPEN-SHORT
SHORT-OPEN)
Selects different reflection devices (open/short or
short/open) to be connected to Ports 1 and 2 for the
calibration sequencing.
MIX; MIX?
MATCHED
(OPEN-OPEN
SHORT-SHORT)
Selects the same type of reflection device (open/open
or short/short) to be connected to Ports 1 and 2 for
the calibration sequencing.
MAT; MIX?
CAL FRONT PANEL
KEY MENUS OPERATION
4-172 MS462XX OM