Specifications
Menu Name Function Description GPIB Mnemonic
SELECT
TRANSMISSION
FREQ RESPONSE
CALIBRATION
TYPE
FORWARD PATH (S21) Changes the soft-key display to the SELECT USE OF
ISOLATION IN CALIBRATION menu.
CFT; CXX?
REVERSE PATH (S12) Changes the soft-key display to the SELECT USE OF
ISOLATION IN CALIBRATION menu.
CRT; CXX?
BOTH PATHS
(S21, S12)
Changes the soft-key display to the SELECT USE OF
ISOLATION IN CALIBRATION menu.
CBT; CXX?
SELECT TYPE OF
LOAD
BROADBAND
FIXED LOAD
Selects a broadband load for calibration and changes
soft-key display to the BROADBAND LOAD
PARAMETERS menu.
BBL; BBX?
SLIDING LOAD
(MAY ALSO
REQUIRE A
BROADBAND
FIXED LOAD)
Selects sliding load for calibration. If low-end
frequency is below 2 GHz (4 GHz for V Connector), a
fixed broadband load is also required.
SLD; BBX?
SELECT USE OF
ISOLATION IN
CALIBRATION
INCLUDE ISOLATION
(STANDARD)
Includes isolation in calibration setup and changes
soft-key display to the SELECT CALIBRATION
POINTS menu.
ISN; ISX?
EXCLUDE ISOLATION Excludes isolation from calibration setup and
changes soft-key display to the SELECT
CALIBRATION POINTS menu.
ISF; ISX?
SELECT
WAVEGUIDE KIT TO
USE
INSTALLED KIT The lines below indicate the characteristics of the
installed waveguide calibration kit, if applicable.
None
IDENTIFIER
XXXX
Displays the type of waveguide used. WGSER?
CUTOFF FREQ
XXX.XXXXXXXXXGHz
Displays the cutoff frequency of the waveguide. WGCUTOFF?
SHORT 1
XX.XXXXmm
Displays the offset length of the first calibration short. WGSHOFF1?
SHORT 2
XX.XXXXmm
Displays the offset length of the second calibration
short.
WGSHOFF2?
USE INSTALLED
WAVEGUIDE KIT
Selects installed waveguide kit and changes soft-key
display to the CONFIRM CALIBRATION
PARAMETERS menu.
WKI; WKX?
USER DEFINED Changes the soft-key display to the ENTER
WAVEGUIDE PARAMETERS menu.
WKD; WKX?
SINGLE POINT C.W.
CALIBRATION
C.W. FREQ
XXX.XXXXXXXXXGHz
Sets the C.W. Frequency. CWF; CWF?
NEXT CAL STEP Changes the soft-key display to the CONFIRM
CALIBRATION PARAMETERS menu, based on the
Calibration Method and/or Line Type selections made
using an earlier soft-key menu.
None
FRONT PANEL CAL
OPERATION KEY MENUS
MS462XX OM 4-173