Specifications

Menu Name Function Description GPIB Mnemonic
THRU UPDATE 2
(FULL 4 PORT CAL)
THRU (2-3)
OMIT
/THRU
LINE LENGTH
0.000 mm
Select whether to omit the thru or select a true thru.
Enter the line length offset if a thru is selected.
ACTHRU23T0;
ACTHRU23T1;
ACTHRU23TX?;
ACTOLP23;
ACTOLP23?
THRU (2-4)
OMIT
/THRU
LINE LENGTH
0.000 mm
Select whether to omit the thru or select a true thru.
Enter the line length offset if a thru is selected.
ACTHRU24T0;
ACTHRU24T1;
ACTHRU24TX?;
ACTOLP24;
ACTOLP24?
THRU (3-4)
OMIT
/THRU
LINE LENGTH
0.000 mm
Select whether to omit the thru or select a true thru.
Enter the line length offset if a thru is selected.
ACTHRU34T0;
ACTHRU34T1;
ACTHRU34TX?;
ACTOLP34;
ACTOLP34?
CONNECT A THRU
LINE BETWEEN
PORT 1 AND 2
None
START THRU UPDATE Changes the soft-key display to the AUTOCAL THRU
UPDATE menu.
BEGTU
RETURN Changes soft-key display to the PERFORM
AUTOCAL menu.
None
THRU/
RECIPROCAL
PARAMETERS
(2 PORT
CALIBRATION)
1,2 DEVICE TYPE
THRU/RECIPROCAL
Select the device type for Ports 1 and 2 for the
calibration.
TRP12DR;
TRP12DT;
TRP12D?
LENGTH
XXXX MM
Enter the thru/reciprocal offset line length for Ports 1
and 2.
TRP12OL;
TRP12OL?; TOL;
TOL?
THROUGH LINE
IMPEDANCE
XXXXXX W
Enter the THROUGHLINE impedance value. TLZ; TLZ?
HELP ON/OFF Toggle the informational Help screen ON or OFF. None
NEXT CAL STEP Changes soft-key display to the CONFIRM
CALIBRATION PARAMETERS menu.
None
CAL FRONT PANEL
KEY MENUS OPERATION
4-178 MS462XX OM