Specifications

1-8 PRECISION COMPONENT
KITS
Two types of precision-component kits are available: calibration and
verification. Calibration kits contain components used to identify and
separate error sources inherent in microwave test setups. Details of
these kits are described in the following paragraphs.
3750R
Calibration Kit
The 3750R Calibration Kit (Figure 1-2) contains
precision 3.5 mm components with characteristics
that are traceable to the NIST. Used primarily by
the metrology laboratory, these components provide
the most dependable means of determining system
accuracy. The kit is available as Option 1 or 3, as de
-
scribed below:
q
Option 1: A set of five phase equal
insertables
q
Option 3: Includes two additional
terminations required for four-port
calibration. In the case of 3.5 mm or N, a
male and female termination would be
added
3751R
Calibration Kit
The 3751R Calibration Kit (Figure 1-3) contains
precision GPC-7 components with characteristics
that are traceable to the NIST. Used primarily by
the metrology laboratory, these components provide
the most dependable means of determining system
accuracy. The kit is available as Option 2 or 3, as de-
scribed below:
q
Option 2: A third termination required for
three-port calibrations
q
Option 3: Includes two additional
terminations required for four-port
calibration. In the case of 3.5 mm or N, a
male and female termination would be
added
PRECISION GENERAL
COMPONENT KITS INFORMATION
1-6 MS462XX OM
Figure 1-2. Model 3750R
Calibration Kit
Figure 1-3. Model 3751R
Calibration Kit