Specifications

ERROR ERROR AND STATUS
MESSAGES MESSAGES
5-10 MS462XX OM
Code Message Description Corrective Action
7100 FILE MARKED READ ONLY Can't perform a write Mark the file to write accessible if needed
7140 GENERAL FLOPPY DRIVE
FAIL
Invalid disk media or format Reformat disk in the MS462XX
7142 FLOPPY DISK READ ERROR Can't perform a read Reformat disk in the MS462XX
7143 FLOPPY DISK WRITE ERROR Can't perform a write Reformat disk in the MS462XX
7146 FLOPPY DISK CHANGED Not the same disk Insert the same disk
7147 FLOPPY DISK UNAVAILABLE Can't access floppy disk Check the MX462X supports floppy disk
7169 FLOPPY INIT FAIL Can't initial floppy disk Check if it is a bad disk
7170 GENERAL HARD DISK FAIL Can't access hard disk Check if there is a hard disk or bad connection
7172 HARD DISK READ ERROR Can't perform a read Check if the disk is compatible
7173 HARD DISK WRITE ERROR Can't perform a write Check if the disk is compatible
7177 HARD DISK UNAVAILABLE Can't access hard disk Check if there is a hard disk or bad connection
7199 HARD DISK INIT FAIL Can't initialize hard disk Check if the disk is compatible or bad
connection
7200 IEEE 488.2 GPIB BUS ERROR GPIB bus error
7203 NO LISTENER ON BUS No listener on GPIB bus
7204 GPIB COMMAND ERROR GPIB command error Check Service Log for detail
7205 GPIB EXECUTION ERROR GPIB execution error Check Service Log for detail
7206 GPIB DEVICE SPECIFIC
ERROR
GPIB device error Check Service Log for detail
7207 GPIB QUERY ERROR GPIB query error Check Service Log for detail
7210 DEDICATED GPIB BUS
ERROR
Dedicated GPIB bus error Check Service Log for detail
7220 PLOTTER NOT RESPONDING Plotter doesn't respond to
the operation
Check if bad connection occurred or power off
7221 PLOTTER NOT READY Plotter is not ready Wait until it is not busy or check if bad
connection occurred
7222 PLOTTER OUT OF PAPER There is no paper Place paper
7223 PLOTTER PEN UP Pen is not ready Place pen in right position
7230 POWER METER NOT
RESPONDING
Power meter is not ready Check if bad connection occurred
7250 EXT SOURCE NOT
RESPONDING
External source is not ready Check if bad connection occurred
7310 PRINTER NOT RESPONDING Printer is not ready Check if bad connection or power off
7311 PRINTER NOT READY Printer is not ready Check if bad connection
7312 PRINTER OUT OF PAPER Printer is out of paper Place paper
7330 SERIAL PORT ERROR
7340 ETHERNET PORT ERROR
Table 5-2. Peripherals (Hard and Floppy Disks and GPIB) Error Messages (1 of 2)