Specifications

Plotter Output The protocol used to control plotters is HP-GL
(Hewlett-Packard Graphics Language). HP-GL con
-
tains a comprehensive set of vector graphics type
commands. These commands are explained in the
Interfacing and Programming Manual for any cur
-
rent model Hewlett-Packard plotter, such as the
7470A.
When the plotter is selected as the output device, it
is capable of drawing the graph shown on the screen
or of drawing only the data trace(s), so that multiple
traces may be drawn on a single sheet of paper (in
different colors, if needed). Examples of a plotter
output are shown in Figures 6-17 and 6-18.
Disk Output The MS462XX can write-to or read-from the disk all
measured data. This data is stored as an ASCII file
in the exact same format as fora tabular printout. If
read back from the disk, the data is output to the
printer. There, it prints as tabular data.
DATA HARD COPY
DISPLAYS AND DISK OUTPUT
MS462XX OM 6-19