Specifications

the kit). Orient the handles such that the slotted opening in the
handle mounting plate (Figure 2-1) is toward the bottom of the unit.
Step 6. For Option 1, install the rack mount assembly to the front and rear
using the green-headed screws removed earlier (or use the ones from
the kit). Orient the assemblies such that the slotted opening in the
handle mounting plate (Figure 2-1) is toward the bottom of the unit.
This completes the installation of the slide assembly.
2-9 PREPARATION FOR
STORAGE AND/OR
SHIPMENT
The following paragraphs describe the procedure for preparing the
MS462XX for storage or shipment.
Preparation
for Storage
Preparing the MS462XX for storage consists of
cleaning the unit, packing the inside with mois
-
ture-absorbing desiccant crystals, and storing the
unit in a temperature environment that is main
-
tained between –40 and +70 degrees centigrade
(–40 to 156 degrees Fahrenheit).
Preparation
for Shipment
To provide maximum protection against damage in
transit, the MS462XX should be repackaged in the
original shipping container. If this container is no
longer available and the MS462XX is being returned
to Anritsu for repair, advise Anritsu Customer
Service; they will send a new shipping container
free of charge. In the event neither of these two
options is possible, instructions for packaging and
shipment are given on the following page.
INSTALLATION PREPARATION FOR
STORAGE AND/OR SHIPMENT
MS462XX OM 2-7
Figure 2-1. Rack Mount Handle Showing Slotted Opening
Slotted Opening