Specifications

Use a Suitable Container
Obtain a corrugated cardboard carton with a
275-pound test strength. This carton should have in
-
side dimensions of no less than six inches larger
than the instrument dimensions to allow for cush
-
ioning.
Protect the Instrument
Surround the instrument with polyethylene sheet
-
ing to protect the finish.
Cushion the Instrument
Cushion the instrument on all sides by tightly pack
-
ing dunnage or urethane foam between the carton
and the instrument. Provide at least three inches of
dunnage on all sides.
Seal the Container
Seal the carton by using either shipping tape or an
industrial stapler.
Address the Container
If the instrument is being returned to Anritsu for
service, mark the Anritsu address and your return
address on the carton in one or more prominent
locations. For international customers, use the
address of your local representative (Table 2-1). For
U.S.A. customers, use an Anritsu address shown
below:
Anritsu Company
ATTN: Customer Service
685 Jarvis Drive
Morgan Hill, CA 95037
-
2809
10 New Maple Avenue
Unit 305
Pine Brook, NJ 07058
1155 E. Collins Blvd.
Richardson, TX 75081
NOTE
Contact Anritsu Call Center at 1-800-
ANRITSU (1-800-267-4878) for return
instruction prior to shipping the instrument
(for U.S.A. Customers).
SERVICE INSTALLATION
CENTERS
2-8 MS462XX OM