Specifications

A-7 SEQUENCE CREATION For this example, you will create a program for Sequence 1. You will
be instructed to enter the parameters to setup the measurement
environment that you wish to make. For this example, the sequence
sets up start and stop frequency, and graph type.
Step 1.
Press Seq/EDIT SEQUENCE.
As shown in Figure A-2 (following page), a list of in
-
structions appears on the display to help you create
or edit a sequence.
Step 2.
Press SEQUENCE 1/SEQ 1.
Step 3.
Press Freq/ START 1.0 GHZ /STOP 2.0 GHZ.
Step 4.
Press Display/GRAPH TYPE/LOG MAGNITUDE.
Step 5.
Press Display/AUTO SCALE.
Step 6. Observe that the screen displays the box and text
shown at left.
Step 7.
Press Seq/DONE SEQUENCE EDIT.
This sequence is stored in memory as
SEQUENCE 1/NAME 1.
SEQUENCE SEQUENCE
CREATION OPERATIONS
A-6 MS462XX OM
BEGIN OF SEQUENCE
START 1.0 G/ns/m
STOP 2.0 G/ns/m
LOG MAGNITUDE
AUTOSCALE