Specifications

A-8 SEQUENCE
MODIFICATION
Modifying a sequence is described below.
Delete a Statement
Step 1. Press Seq/EDIT SEQUENCE/SEQUENCE 1.
Step 2. Using the rotary knob, move the cursor to the
AUTOCAL statement, which will be deleted.
Turn the knob to the right for upward direction and
to the left for downward direction.
Step 3. Press Clear/Local.
Step 4. After deletion, the sequence display is as shown as
top left.
Step 5.
Press Seq/DONE SEQUENCE EDIT.
This sequence is stored in memory as
SEQUENCE 1/NAME 1.
Insert a Statement
Step 1.
Press Seq/EDIT SEQUENCE/SEQUENCE 1.
Step 2. Using the rotary knob, move the cursor to the
statement before the new statement; in this exam
-
ple, LOG MAGNITUDE.
Step 3.
Press Avg/AVERAGE ON.
Step 4. After insertion, the sequence display is as shown as
bottom left.
Step 5.
Press Seq/DONE SEQUENCE EDIT.
This sequence is stored in memory as
SEQUENCE 1/NAME 1.
SEQUENCE SEQUENCE
MODIFICATION OPERATIONS
A-8 MS462XX OM
BEGIN OF SEQUENCE
START 1.0 G/ns/m
STOP 2.0 G/ns/m
LOG MAGNITUDE
BEGIN OF SEQUENCE
START 1.0 G/ns/m
STOP 2.0 G/ns/m
AVERAGE ON
LOG MAGNITUDE