Specifications

A-11 SEQUENCE REMOVAL This example illustrates a sequence being removed from memory.
Step 1. Press Seq/UTILITY.
Step 2. Press DELETE SEQUENCE/SEQUENCE 2.
A-12 SEQUENCE NAMING Each sequence is assigned a default name, but names can be changed,
as follows:
Step 1. Press Seq then the following soft keys:
UTILITY
RENAME SEQUENCE
SEQUENCE 1
Step 2. Using the keyboard or DEFINE SEQUENCE
NAME screen, rename the sequence.
A-13 SEQUENCE LOAD This function enable user to restore a sequence file from either the
hard disk or a floppy disk to a selected sequence in memory.
Step 1. Press Seq then the following soft keys:
UTILITY
LOAD SEQUENCE
TO SEQUENCE NUMBER
Step 2. Enter “1” from the keypad.
Step 3.
Continue by pressing FROM FLOPPY (or FROM
HARD DISK).
Step 4. Select one of the listed disk files.
NOTES
If the system is “booted” by Default 0, all
sequences are removed from memory.
The GPIB supports these three sequence
functions. Please refer to the MS462XX
Programming Manual, Part Number
10410-00204.
SEQUENCE SEQUENCE
OPERATIONS REMOVAL
MS462XX OM A-11