Specifications

Step 7. Press Seq then the following soft keys:
CONTROL STATEMENT
CONDITION STATEMENT
LOOP COUNTER - 1
IF LOOP COUNTER<>0
SELECT EXISTING SEQUENCE
SEQUENCE 2
Step 8.
Press Seq/DONE SEQUENCE EDIT.
This sequence is also stored in memory as
SEQUENCE 2/ NAME 2.
In the above example, Sequence 2 will save two mea
-
sured data files on floppy disk: xyz00002.tab and
xyz00001.tab. Note that a file name may be embed
-
ded without a loop counter. In the above example,
this would result in the data file xyz being overwrit
-
ten the second time through the loop.
SEQUENCE LOOP COUNTER EMBEDDED
OPERATIONS IN A DATA FILE NAME
MS462XX OM A-17