Specifications

Purpose, of Calibration Kits ..........11-3
R
Rack Mount (Option 1) Installation .......2-6
Rear Panel
Connector Key .........B-4TOB-13
Diagrams.................B-4
Ethernet Pinout Diagram .......B-11
EXT I/O Pinout Diagram ........B-9
GPIB Pinout Diagram..........B-7
LPT Pinout Diagram ..........B-8
SCSI2 Connector Pinout Diagram. . . B-13
Serial Port Pinout Diagram ......B-12
VGA Pinout Diagram .........B-10
Rear Panel Connectors..............B-3
Reference Extension, RA In to RA Out .....B-6
Reference Flat ..................7-15
Reference Position Marker ...........6-14
Reflection Only Calibration, Flexible......7-35
Rotary Knob....................4-5
S
Sampler Efficiency Test ............10-10
Save/Recall Key Menus ............4-116
Saving a Sequence ...............A-26
Scattering Parameters ..............3-9
Scope of Manual .................1-3
Self Test .....................10-4
Self Test Messages ...............5-12
SEQ Key Menus ................4-121
Sequence
Dumping ASCII to Disk ........A-26
Saving Original Format ........A-26
Sequence Cascading ..............A-12
Sequence Creation ................A-6
Sequence Execution ...............A-9
Sequence Load .................A-11
Sequence Modification ..............A-8
Sequence Naming................A-11
Sequence Operation ...............A-3
Basic Functions .............A-4
Control Statement............A-4
Description................A-3
Key Operation ..............A-4
Menu Display..............A-10
Sequence Removal ...............A-11
Serial Number................1-3,1-10
Service Centers ..................2-9
Shipment .....................2-7
Single Channel Display Mode ..........6-3
Sliding Load
Pin Depth ................7-13
Used in Calibration ...........7-6
Sliding Loads ..................7-13
SMA.......................7-13
Smith Chart
20 dB Expanded ............6-11
3 dB Compressed ............6-11
Normal .................6-10
Smith Chart Display ..............3-10
Soft-Key Menus
Domain ..................8-8
Gating..................8-13
Index of Menu Maps...........D-3
Marker Range..............8-11
Reference Delay .............8-8
Response ................8-10
Set Range.................8-9
Window Shape .............8-12
Software Version ................1-10
Source Match ...................7-6
Source Module or Modules ............3-4
S-Parameter
Description............3-9to3-10
General ..................3-9
Selection, Display of ..........6-16
Specifications, Performance ...........1-8
Standard 2-Port (OSL) Calibration Procedure. 7-19
Start Print Key Menus .............4-87
Status Display..................6-14
Step Response...................8-5
Stimulus Keys ..................4-4
Storage ......................2-7
Sub-Sequence
Calling by Limit Testing........A-14
Calling by Loop Counter ........A-13
Sweep Key Menus................4-65
Sweep Marker Indicator ............6-15
System Description................1-4
System Dynamic Range Test .........10-17
Test Procedure.............10-17
Test Setup ...............10-17
System GPIB Interconnection ..........2-5
System Information ...............1-10
System State Keys ................4-5
SUBJECT INDEX R
S
MS462XX OM Index-5