Specifications

Safety 2 MS462XX OM
Always refer to the operation manual when working near locations
where the alert mark, shown on the left, is attached. If the opera
-
tion, etc., is performed without heeding the advice in the operation
manual, there is a risk of personal injury. In addition, the equip
-
ment performance may be reduced. Moreover, this alert mark is
sometimes used with other marks and descriptions indicating
other dangers.
WARNING
When supplying power to this equipment, connect the accessory
3-pin power cord to a 3-pin grounded power outlet. If a grounded
3-pin outlet is not available, use a conversion adapter and ground
the green wire, or connect the frame ground on the rear panel of
the equipment to ground. If power is supplied without grounding
the equipment, there is a risk of receiving a severe or fatal electric
WARNING
This equipment can not be repaired by the operator. DO NOT at-
tempt to remove the equipment covers or to disassemble internal
components. Only qualified service technicians with a knowledge
of electrical fire and shock hazards should service this equipment.
There are high-voltage parts in this equipment presenting a risk
of severe injury or fatal electric shock to untrained personnel. In
addition, there is a risk of damage to precision components.
WARNING
Repair
For Safety
Use two or more people to lift and move this equipment, or use an
equipment cart. There is a risk of back injury, if this equipment is
lifted by one person.
WARNING