Specifications

Menu Name Function Description GPIB Mnemonic
SELECT FILE TO
READ
FILE 1 Recalls the data stored in file number 1 None
FILE 2 Recalls the data stored in file number 2 None
FILE 3 Recalls the data stored in file number 3 None
FILE 4 Recalls the data stored in file number 4 None
PREVIOUS PAGE Returns to the previous menu of file names. None
NEXT PAGE Advances to the next page of file names. None
RETURN Returns to the previous soft-key menu. None
SELECT LABEL
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789()-
!#$%&’@^_’{}-
Enter the label using the rotary knob to select letters,
numbers, or both. A letter or number turns red to
indicate that the letter/number has been chosen for
selection. Pressing the Enter key selects the letter or
number. You are allowed up to twelve cha
None
*?:\.SP Forkeyboard command line entry. None
BKSP CLR DONE Selecting BKSP deletes the last letter in the label
displayed above.
Selecting CLR deletes the entire label.
Selecting DONE signals that you have finished
writing the label.
None
TURN KNOB TO
INDICATE
CHARACTER OR
FUNCTION
Use the rotary knob to indicate the letter or number
you wish to select.
You can use the external keyboard up-arrow and
down-arrow keys to move between rows.
None
PRESS <ENTER> TO
SELECT
Pressing the Enter key enters the selected
letter/number in the label.
None
NUMBERS MAY BE
SELECTED USING
KEYPAD
You may also select numbers and decimals using
the keypad.
None
PRESS <CLEAR> TO
ABORT
Press the Clr/Local key to abort the process. None
SELECT POLAR
CHART MODE
MAGNITUDE, PHASE Selects Polar Chart Display to show magnitude and
phase for the full frequency range-from start
frequency to stop frequency.
PCP
MAGNITUDE,
SWEEP POSITION
Selects Polar Chart Display to show magnitude
information only for the phase data that falls
between the start and stop angles selected below.
PCS
SET SWEEP
POSITION
BOUNDARIES
None
START ANGLE
X.XXDEG
Sets the start angle for the data display. AST; AST?
STOP ANGLE
X.XXDEG
Sets the stop angle for the data display. ASP; ASP?
RETURN Returns to the previous soft-key menu. None
SELECT TRACE
MATH
ADD (+) Selects DATA + MEMORY as the math function. ADD
SUBTRACT (-) Selects DATA - MEMORY as the math function. MIN
MULTIPLY (*) Selects DATA x MEMORY as the math function. MUL
DIVIDE (/) Selects DATA / MEMORY as the math function. DIV
RETURN Returns to the previous soft-key menu. None
FRONT PANEL DISPLAY
OPERATION KEY MENUS
MS462XX OM 4-41