Specifications

Menu Name Function Description GPIB Mnemonic
SINGLE LIMITS
SMITH CHART
UPPER LIMIT
XX.XXXXXX U
ON/OFF
Turns the upper limit on or off for the active channel,
and sets its value.
UPL1; UPL0
LOWER LIMIT
XX.XXXXXX U
ON/OFF
Turns the lower limit on or off for the active channel,
and sets its value.
LOL1; LOL0
DISPLAY LIMITS
ON/OFF
Enables both limit lines for the active channel. LON; LOF; LON?
TEST LIMITS Changes the soft-key display to the TEST LIMITS
menu.
LTST
RETURN Returns to the previous soft-key menu. None
SINGLE LIMITS
SWR
-SWR- None
UPPER LIMIT
XX.XXXXXX U ON/OFF
Turns the Upper Limit line on or off for the active
channel, and sets its value. For your convenience,
the arbitrarily set limit lines allow you to delineate a
go/no go line on your SWR display beyond which the
measured values are unacceptable.
UPL1; UPL0?
LOWER LIMIT
XX.XXXXXX U
ON/OFF
Turns the Lower Limit line on or off for the active
channel.
LOL1; LOL0
READOUT LIMIT Changes the soft-key display to the READOUT
LIMIT menu.
None
DISPLAY LIMITS
ON/OFF
Enables both previously set limit lines to appear for
the active channel.
LON; LOF; LON?
TEST LIMITS Changes the soft-key display to the TEST LIMITS
menu.
LTST
SEGMENTED LIMITS Changes the soft-key display to the SEGMENTED
LIMITS menu.
None
RETURN Returns to the previous soft-key menu. None
TEST LIMITS
LIMIT TESTING
ON/OFF
Toggles limit testing on or off. LT1; LT0; LTX?
BEEP ON FAILURE
ON/OFF
Toggles Beep on Failure mode on or off. LB1; LB0; LBX?
LIMIT TEST TTL FAIL
CONDITION:
TTL LOW/TTL HIGH
Toggles limit test fail conditions high or low. LVH; LVL; LVX?
TEST RESULT:
CHANNEL 1
PASS/FAIL
CHANNEL 2
PASS/FAIL
CHANNEL 3
PASS/FAIL
CHANNEL 4
PASS/FAIL
Displays test results. LTST
EXT I/O OUTPUT
ON/OFF
Enable/disable external output. EXTIO0, EXTIO1,
EXTIOX?
RETURN Returns to the previous soft-key menu. None
DISPLAY FRONT PANEL
KEY MENUS OPERATION
4-48 MS462XX OM