Specifications

Product Brochure
l
MX3700xxA 13
GSM/EDGE Waveform Patterns
Standard
■
GSM/EDGE Waveform Patterns
The GSM/EDGE waveform patterns listed in the table below are
installed on the internal hard disk when MG3700A Vector Signal
Generator is installed. Details for the pattern files are given below.
Signals for testing receivers and for evaluating devices in a GSM/
EDGE system are output by selecting one of these GSM/EDGE
waveform patterns.
•
GMSK_PN9, 8PSK_PN9
PN9 data which doesn't have slot format is inserted.
•
GMSK_TN0, 8PSK_TN0
PN9 data is inserted into the entire area of the slots, except the
guard. The PN9 data in each slot is continuous.
•
NB_GMSK, NB_ALL_GMSK, NB_8PSK, NB_ALL_8PSK
PN9 data is inserted into the normal burst encrypted bit area.
The PN9 data in the slots is continuous.
•
TCH_FS
Supports Speech channel at full rate (TCH/FS) specified in Section
3.1 of 3GPP TS05.03
•
CS-1_1 (4)_SLOT (_4SLOT )
Supports packet data block type 1 (CS-4) and 4 (CS-1) specified in
Section 5.1 of 3GPP TS05.03
•
DL (UL)_MCS-1 (5, 9)_1SLOT (_4SLOT)
Supports packet data block types 5 (MCS-1), 9 (MCS-5), and 13
(MCS-9) specified in Section 5.1 of 3GPP TS05.03
Selecting Waveform Pattern
Waveform Patterns Uplink/Downlink Data Output Slot Communications
GMSK_PN9 Uplink/Downlink
PN9
∗
1
– –
8PSK_PN9 Uplink/Downlink – –
GMSK_TN0 Uplink/Downlink
PN9
∗
2
TN0 –
8PSK_TN0 Uplink/Downlink TN0 –
NB_GMSK Uplink/Downlink
PN9
∗
3
TN0
GSM
NB_ALL_GMSK Uplink/Downlink All Slots
NB_8PSK Uplink/Downlink TN0
NB_ALL_8PSK Uplink/Downlink All Slots
TCH_FS Uplink/Downlink
PN9
∗
4
TN0
CS-1_1SLOT Uplink/Downlink TN0
CS-4_1SLOT Uplink/Downlink TN0
DL_MCS-1_1SLOT Uplink/Downlink TN0
GPRS
UL_MCS-1_1SLOT Uplink/Downlink TN0
DL_MCS-5_1SLOT Uplink/Downlink TN0
EDGE
UL_MCS-5_1SLOT Uplink/Downlink TN0
DL_MCS-9_1SLOT Uplink/Downlink TN0
UL_MCS-9_1SLOT Uplink/Downlink TN0
DL_MCS-9_4SLOT Uplink/Downlink TN0, 1, 2, 3
UL_MCS-9_4SLOT Uplink/Downlink TN0, 1, 2, 3
∗1: PN9 data is inserted into the entire area that does not have the slot format.
∗2: PN9 data is inserted into the entire area of the slots, except the guard.
∗3: PN9 data is inserted into the normal burst encrypted bit area.
∗4: The bit string channel-coded for PN9 data is inserted into the normal burst encrypted bit area.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com