Specifications

Product Brochure
l
MX3700xxA 15
PDC Waveform Patterns
Standard
■
PDC Waveform Patterns
Waveform patterns for the Wanted Signals and Interference
Signals required to execute the ARIB STD-27-specified
transmission and reception tests are stored on the MG3700A
internal hard disk. and can be output without requiring options (but
check the parameters on the next page first).
Waveform patterns to output uplink/downlink Slot 0 data only and
unframed waveform pattern for interference signals are provided for
full rate and half rate.
When a signal with different parameters is required, the optional
MX370102A TDMA IQproducer can be used to set parameters and
generate waveforms.
Selecting Waveform Pattern
Waveform Patterns Uplink/Downlink Half Rate/Full Rate Output Slot Evaluation
PI_4_DQPSK_PN9 – – No frame TX Device Test
PI_4_DQPSK_PN15 – – No frame Interfering Signal
DL_Full_Rate_Slot0 Uplink/Downlink Full rate Slot 0 only
Wanted Signal
for Receiver Test
DL_Half_Rate_Slot0 Uplink/Downlink Half rate Slot 0 only
UL_Full_Rate_Slot0 Uplink/Downlink Full rate Slot 0 only
UL_Half_Rate_Slot0 Uplink/Downlink Half rate Slot 0 only
CW – – – Interfering Signal
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com