Specifications

4 Product Brochure

MX3701xxA

Additive White Gaussian Noise (AWGN) IQproducer

This GUI-based application software is used to generate AWGN

waveform pattern files optimized for each communication

system for the Dynamic Range Test, etc.

The AWGN waveform pattern file is created by setting the same

bandwidth and sampling rate as the combined waveform pattern

(Wanted Signal) and a multiplier of the Wanted Signal.

Specifying the combined waveform pattern (Wanted Signal) from

the waveform pattern for the desired communication method

automatically sets the Wanted Signal bandwidth and sampling rate.

The resultant AWGN waveform pattern and an existing waveform

pattern can be combined, which is useful for measuring base-

station dynamic range.

(With Specified Wanted Signal)

AWGN BW/Wanted Signal BW ratio

(With Unspecified Wanted Signal)

Wanted Signal BW,

AWGN BW,

Sampling Rate

Main Parameter Settings

(1) Wanted Signal BW: Wanted Signal bandwidth

Setting range: 0.0010 to 120.0000 MHz

(2) AWGN BW (B)/Wanted Signal BW (A):

Magnification of AWGN to Wanted Signal

Setting range: 1.0, 1.5, 2.0, 2.5

(3) Sampling Rate:

Setting range: 0.0200 to 160.0000 MHz

Becomes same value as Wanted Signal

(4) AWGN BW (B): Bandwidth of AWGN

Calculated automatically from (1) and (2) with following

limitation:

Limit range: 0.001 to 20.000 MHz and Sampling rate/2 max.,

20.001 to 120.000 MHz and Sampling rate max.

IQproducer Main Screen

AWGN IQproducer Setting Screen

Standard accessory

ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com