Specifications

16 Product Brochure
l
MX3701xxA
MX370104A Multi-carrier IQproducer
Mixed CDMA2000 Forward and Reverse Signal
Multi-carrier Setting Screen
FFT Analysis Screen
This GUI-driven PC application software is used to create a multi-
carrier waveform pattern for modulated signals and tone signals of
communications systems.
Once created, the waveform pattern file is downloaded to the
MG3700A hard drive. Using the MG3700A, Vector Signal
Generator functionality, the files are loaded, selected, and output
as a multi-carrier RF signal.
W-CDMA downlink multi-carrier signals are supported as well as
various types of clipping.
● Multi-purpose Function
By using the multi-carrier function, a signal with up to 32 carriers
can be converted to a single waveform pattern. While it may not be
possible to set 32 carriers due to the frequency offset and the
waveform pattern, it is possible to create a waveform pattern with
more than 32 carriers by combining multi-carrier waveform
patterns.
Optional
● Adjust Rate Function
The Adjust Rate function converts two waveform patterns with
different sampling rates into two waveforms patterns with the same
sampling rate.
By using the MG3700A Two-signal Combining function,
combining waveform patterns with different sampling rates causes
the bandwidth to change because the waveform pattern in memory
B is output at the sampling rate of the waveform pattern in memory
A. Using the Adjust Rate function, it is possible to combine the
Wanted Signal and Interference Signal for various
communication systems with the same sampling rate.
By matching the sampling rates of the two waveform patterns using
this function, it is even possible to output a signal for
different communication systems using the Two-signal Combining
function.
Multi-carrier Setting Screen
FFT Analysis Screen
WLAN and Bluetooth Sampling Rate Adjustment
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com