Specifications

Product Brochure
l
MX3701xxA 21
MX370105A Mobile WiMAX IQproducer
Optional
● Downlink [PHY/MAC] Parameter Setting Range
Tree Items Setting Range
Downlink Data Status Enable, Disable
Preamble Data Status Enable, Disable
Preamble Index Display only: Set at Common.
IDcell Display only: Depends on Preamble Index setting
Zone#0 to #7 Data Status Enable, Disable
Permutation PUSC, PUSC (all SC), FUSC, AMC (6×1), AMC (3×2), AMC (2×3), AMC (1×6)
Pilot Position Hopping, Center
Dedicated Pilot 0, 1
Pilot Boosting OFF, ON
STC/MIMO No transmit diversity, 2 Antenna Matrix A (STTD), 2 Antenna Matrix B vertical encoding
OFDMA Symbol Offset
<Zone#0> Display only
<Zone#1 to #7) 0 to 255 symbol (without Preamble), 1 to 255 symbol (with Preamble)
No. OFDMA Symbols
2 to 254 symbol (when PUSC), 2 to 254 symbol (when PUSC1 (all SC)), 1 to 255 symbol (when FUSC),
1 to 255 symbol (when AMC (6x1)), 2 to 254 symbol (when AMC (3x2)),
3 to 255 symbol (when AMC (2x3)), 6 to 252 symbol (when AMC (1x6))
DL-PermBase 0 to 31 (Cannot be set at Zone#0)
DL-Burst Number 1 to 16
PRBS_ID 0 to 3 (Cannot be set at Zone#0)
FCH Data Status Enable, Disable
FCH Type 16bit repeat, PN9x, PN15x, DLFP, User File
FCH Type Repeat Data 0000 to FFFF (HEX): Can be set when FCH Type = 16 bit repeat
FCH Type User File User File selected: Can be set when FCH Type = User File
Used subchannel Bitmap
bit0 to 5
Display only: Set at Common
Repetition Coding Indication Display only: Set at Common
Coding Indication Display only: Set at Common
DL-MAP Length Display only: Set at DL-MAP
MAC Message Data Status Enable, Disable
DL-MAP Data Status Enable, Disable
DL-MAP Type 16bit repeat, PN9x, PN15x, S_QPSK, S_16QAM, S_64QAM, DL-MAP, Compressed DL-MAP, User File
DL-MAP Type Repeat Data 0000 to FFFF (HEX): Can be set DL-MAP Type = 16 bit repeat
DL-MAP Type User File User File selected: Can be set when DL-MAP Type = User File
DL-MAP Length
0 to 255 slot: The calculation value is displayed when DL-MAP Type = DL-MAP or Compressed DL-MAP.
The length of DL-MAP can be set in other cases.
DCD Count 0 to 255: Can be set when DL-MAP Type = DL-MAP or Compressed DL-MAP
Base Station ID
0000 0000 0000 to FFFF FFFF FFFF (HEX): Can be set when DL-MAP Type = DL-MAP or Compressed DL-MAP
DL-MAP PHY Synchronization Field
Frame Duration Display only: Set at Common
Initial Frame Number Display only: Set at Common
Zone# DL-MAP IE #
DIUC (Downlink Interval
Usage Code)
0 to 12
OFDMA Symbol Offset Display only: Set at DL-Burst
OFDMA Subchannel Offset Display only: Set at DL-Burst
Boosting Display only: Set at DL-Burst
No. OFDMA Symbol Display only: Set at DL-Burst
No. Subchannels Display only: Set at DL-Burst
Repetition Coding Indication Display only: Set at DL-Burst
Zone# STC/Zone switch IE
OFDMA Symbol Offset Enable, Disable
Permutation Display only: Set at DL-Zone.
DL Use All SC Indicator Display only
DL-PermBase Display only: Set at DL-Zone.
SUB-DL-
UL-MAP
Data Status Enable, Disable
OFDMA Symbol Offset Display only
OFDMA Subchannel Offset Display only
Length Display only
FEC Code Type and
Modulation Type
<Table 2>
Repetition Coding Indication No repetition, 2, 4, 6
RCID Type Normal CID, RCID11, RCID7, RCID3
HARQ ACK offset indicator 0, 1
DL HARQ ACK offset 0 to 255
UL HARQ ACK offset DL IE Count
OFDMA Symbol Offset 0 to 255
OFDMA Subchannel Offset 0 to 127
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com