User's Manual

Table Of Contents
Wireless Charger&UV Sanitizer
1
Know About Wireless Charger&UV Sanitizer
Touch Switch
UVC-LED
Decoration
Light
Decoration
Light
Transparent
PC Cover
Phone Charging
Position
UVC-LED
P.S.:UVC-LED produce 275nm UV rays
2
3 4
Transparent
PC Cover
Type-C Input
Item Base
Switch For Decoration Light and reset
One-time Press to turn off the Decoration Light
Long-time press more than 5 Seconds to Reset
Insert the
Type-C cable
Touch Sensor Switch
The Phone will with wireless
charging when in disinfection
ShenZhen Ansbabe Technology CO.,LTD.
Emailservice@ansbabe.com
Websitewww.ansbabe.com
Business Line: +86-0755-27399002
Ansbabe provides after-sales support
Works with HUAWEI HiLink
Means this product supports the HUAWEI HiLink protocol.
6 7 9 10 11
5
Press and hold the decoration light switch for 5
seconds, and the red, green and yellow flashes by
turn,to complete the reset.
Product Name: Wireless Charger&UV Sanitizer
This product is only suitable for mobile phone
disinfection and charging. Do not use it for other
purposes.
It is forbidden to forcibly open or close the
disinfection box cover.
It is forbidden to disassemble the product host.
Keep the device in a well ventilated area and
avoid direct heat or direct sunlight.
Please ensure that the disinfection box cover is
closed during the disinfection process.
Children are prohibited from using this product
alone, and should use this product under the
supervision of a guardian.
Be careful and do not use hard objects to collide
with the UVC-LED.
Be careful with water during maintenance, keep
the equipment in a power-off state, and wipe with
a soft cloth when cleaning.
Hazardous Substance
PARTS
Plastics and polymer
components
Pb
Hg
Cd
Cr(VI)
PB B PB DE
PCBA
Metal parts
Cable and cable
assembly
Packaging materials
andcomponents
The preparation of this form in accordance with SJ/T11364
standard.
indicate that the hazardous substance in all homogeneous
material of the component is below the limit specified by
GB/T26572,And there is no better alternative in the industry.
indicate that the hazardous substance exceeds at least one
of themass material in the component beyond the limit
specified by GB/T26572.
Warranty policy of Wireless Charger&UV Sanitizer
1. During the normal use of the product, if the product
has a performance failure caused by non-human
damage, the warranty period of the product is 12
months from the date of buying, and the free
maintenance service is provided during the
warranty period.
Will be fail to get Warranty policy of Wireless
Charger&UV Sanitizer
1. Man-made damage;
2. Exceeding the warranty period;
3. Without warranty card and valid invoice, Except can
prove that the product is under the warranty period;
4. The warranty card does not match the product model
identication, or the warranty card is altered;
5. Equipment damage caused by not according the
user manual in use and maintain;
6. Unauthorized disassembly, repair of products, or
damage to products;
7. Damage caused by force majeure.
Buyer Counterfoil
Buyer information (please ll in the real information,
Ansbabe promises users' information is only for
after sales service)
product information
Name Telephone
Email Post Code
Address
Product Name
Model NO.
Color
Packaging SN number
Service Type
Fault description
Date of acceptance
Maintenance staff Signature
Return Exchange Maintain
Device compatible
15W 10W
7.5W
UVC kills common bacteria
Microorganism
Kill Rate
E.coli
Staphylococcus aureus
>99.99%
>99.99%
Types
Bacteria
Adenovirus
Phagic cytovirus
>99.99%
>99.99%
Virus
Aspergillus niger
Aspergillus
>99.99%
>99.99%
Mold
Spore
80*120mm 100g铜 折
5W
Red breathing
light
Purple breathing
light
No network
Disinfecting
Blue breathing
light
Green breathing
light
Not charging or the network is normal
charging
Keep Yellow
Light Brigh
Warm White
/Pink/Purple
Light keep Bright
Power failure or abnormal transparent
cover
Decoration Light
Indicator color
Description
Quick Guidance
Operating Instructions
Place the mobile phone disinfection box on the
table, insert the Type-C cable, and connect the
power socket.
1.
Touch switch, The device cover automatically
open, put the phone and then touch the switch
again, the cover automatically close, and at the
same time start sterilization and wireless
2.
Wirel ess
Charg e
Wirel ess
Charg e
Wirel ess
Charg e
Wirel ess
Charg e
Operating Instructions Reset Device
Basic Parameters Precautions Hazardous substance name
and content of Product
Warranty Card (optional)
8
Factory Counterfoil
Buyer information (please ll in the real information,
Ansbabe promises users' information is only for
after sales service)
product information
Name Telephone
Email Post Code
Address
Product Name
Model NO.
Color
Packaging SN number
Service Type
Fault description
Date of acceptance
Maintenance staff Signature
Return Exchange Maintain
Product model: ANS-ZY-C-001
Product size: 221x110x31mm
Material: PC / ABS flame retardant material
UV wavelength: 275nm
UV power: ≤ 20mW
Input power:5V 2A/9V 2A/12V 2A
Output power: ≤ 15W
Wi-Fi standard: 802.11b/g/n
Wi-Fi 2.4GHz: ≤20dBm
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
There are no restriction of use
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with the FCC‟s RF exposure guidelines, place the
product at least 20cm from nearby persons.
Ensure that the power adapter used meets the
requirements of Clause 2.5 in IEC60950-1/EN60950-1
and has been tested and approved according to
national or local standards.
Qi :114.534kHz to 145.466kHz42dBuA/m
at 10m for H-field strength
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.

Summary of content (1 pages)