User's Manual

X Close the breech [2] (slide up to the stop in the direction
of the arrow) and push the bolt handle [3] downwards.
[2]
[3]
Fig.6 Closing the breech
X Pull the trigger [10].
9 The rifle is unloaded and uncocked.
11 Engaging / releasing the safety catch
The safety catch can only be engaged/released
when the rifle is cocked. The following describes
the general procedure "releasing/setting the
safety catch".
NOTE!
11.1 Engaging the safety catch
X Push the safety catch [x] to the rear (in the direction of the arrow) (red
spot is not visible).
[x]
Fig.7 Safety catch "Safe"
9 The rifle is cocked and the safety catch is engaged.
13