User's Manual

13.2 Inserting
X Cock the bolt [2] (see Chapter 14.2).
X Bring the bolt [2] up to the receiver [5] (with the guide slot facing down-
wards) while pulling the trigger [10] and push the bolt [2] forwards until
it engages (direction of arrow).
[2]
[10]
[5]
Fig.13 Inserting the bolt
9 The bolt is inserted.
The bolt [2] can only be pushed into the barrel [7]
when it is cocked.
NOTE!
14 Dismantling / assembling the bolt
[b] [c][a]
Fig.14 Bolt
14.1 Uncocking the bolt
a Bolt head
b Central part of bolt with bolt handle
c Rear part of bolt
X Pull the rear part of the bolt [c] against the spring force out of the detent
in the opposite direction to the middle section with the bolt handle [b].
X Twist the rear part of the bolt [c] against the middle section
with the bolt handle [b] until the bolt is uncocked.
16