User's Manual

7 Liability
ANSCHÜTZ will accept no liability or claims for compensation
for damage of any kind arising from:
y failure to comply with the instructions in this user manual,
y improper treatment or repair,
y use of non-original ANSCHÜTZ parts,
y incorrect handling or care,
y negligence,
y removal of the sealing lacquer,
y unauthorised tampering or
y transport damage.
Modifications to or tampering with the rifle or its
parts are forbidden and may possibly infringe the
guarantee conditions.
Alterations of this kind can have an adverse effect
on the safe use of the product and lead to accidents
that endanger life and limb. In such cases the
guarantee is automatically void.
CAUTION!
I The rifle must be examined for any changes each time before use.
8 Assembly and attaching the barrelled action
The stock and the barrelled action are packed
separately for safety reasons and will have to be
assembled.
NOTE!
X Wipe off any excess oil from the surface of the barrelled action.
X Have the bedding screws [a] to hand.
X Insert the bolt in cocked condition and with released trigger [10].
X Remove the magazine [8] from the magazine guide.
X Lay the barrelled action [7] in the milled-out channel in the stock [12]
(see Fig. 2).
X Screw the bedding screws [a] in and tighten alternately and evenly (first
tighten the screws lightly, then tighten the front ones and then the back
ones (looking towards the muzzle).
9