User's Manual
X Remove the bolt [2] (see Chapter 11.1).
X Uncock the bolt [2] (turn the bolt handle [g] counter-clockwise
in the direction of the arrow).
9 The indicator pin [c] which protrudes in the cocked state retracts
completely into the bolt.
[c]
Fig. 18 Indicator pin
X Unscrew the rear cap [a].
A "ratchet noise" can be heard during the first few
rotations.
) All the other bolt parts can be removed in sequence.
X Slide the front spring support back to the stop and turn slightly
to the right or left (approx.
1
/
4
turn).
9 The front spring support, together with the compression spring,
can be pulled off to the front from the firing pin [f].
X Pull out the firing pin with compression spring [f].
9 The bolt [2] is now dismantled and can be cleaned.
[h] [f] [e] [d] [c] [b] [a]
[g]
Fig.19 Dismantled bolt
a Cap
b Compression spring
c Indicator pin
d Rear spring support
e Cover sleeve
f Firing pin with compression spring
g Bolt handle
h Chamber