User's Manual


 
The forend [6] can be adjusted in the following areas:
y Elevation:
The forend can be adjusted in height using packing washers.
Longer screws may be required.
y Length adjustment:
The forend can be moved infinitely variably on the slide rail.
[6]
Fig. 14 Forend

(9003 and 9003 Precise)
X Release the screws [e] and [f] for axial displacement.
X Release the screws [c] and [d] for setting the support angle.
X Release the screw [g] for elevation.
X The screws should be re-tightened after the settings have been
carried out.
[c] [g] [d]
[f]
[e]
Fig. 14a Forend raiser block 9003 and 9003 Precise
Fig. 14b Forend raiser block 9003 and 9003 Precise
