User Manual

Flashing indicates the main unit is searching & receiving RF signal from PC transmitter
Fail to receive RF signal from PC transmitter
(see “ESTABLISH RF CONNECTION WITH MAIN UINIT” section to reconnect the PC transmitter)
H) LAST UPDATE OF REGIONAL FORECAST
It shows the last update of regional forecast from the Internet.
“LAST UPDATE: TODAY”: regional forecast is updated today from the Internet
“LAST UPDATE: -1 DAY”: regional forecast is updated yesterday from the Internet
…. and so on
If your PC is not connected to the Internet for more than 10 days, it will show “LAST UPDATE: -- DAY” and the
regional weather forecast will be replaced by the local weather forecast measured by the built-in pressure
sensor. The rest of the forecast information such as temperature, humidity, chance of precipitation, UVI & wind
forecast will show “ - - “ until the PC is connected to the Internet again.
TIME
A) NETWORK TIME (Auto-synchronized clock)
The clock on the main unit is synchronized to the Internet network time automatically and is adjusted for optimal
accuracy.
NOTE:
- If your PC is not connected to the Internet for a long period of time, the clock display may not be accurate
- You may set the time offset (+/- 0.5, 1, 1.5 or 2 hours) of your home city in the PC program to adjust DST &
time zone if necessary and the time on your main unit will be updated accordingly
Hold [CLOCK] on the main unit to set the 12/24 hour format, press [▲] or [▼] to select and press [CLOCK] to
confirm. The “M” & “D” icons will flash, press [▲] or [▼] to select day/month or month/day format for the
calendar. Press [CLOCK] to confirm and exit.