User Manual

- Press the [Tx] button inside the battery compartment of remote sensor to transmit RF signal
- When RF connection is established, the respective temperature of the selected channel will appear on the
main unit
- Replace the cover and tighten the screws on the remote sensor
PC TRANSMITTER & PROGRAM INSTALLATION
BATTERY INSTALLATION & USB CONNECTION
- Slide to open the battery door on the bottom of the PC transmitter, insert 3 pieces of AAA batteries
according to the polarity indicated. Close the battery door.
- Connect PC transmitter to your PC via USB connection
PC PROGRAM INSTALLATION
- Before installation, ensure that
1) Your PC is connected to the Internet. Try browsing through a couple of websites to make sure
2) You are using Windows 2000, XP or Vista
3) PC transmitter is connected to your PC via USB connection
- Insert CD into your CD ROM and double click the INSTALL.EXE (or NIS01_INSTALL.EXE) program to start
installation. Follow the instruction to complete the installation. You need to have Microsoft .NET
Framework Version 2.0 Redistributable Package (x86) installed in your Windows in order to
complete the installation of the 4-day forecast PC program. If this file was not installed in your
Windows before, the PC installation program will redirect you to the Microsoft web site for
download. You may also access below web site directly.
http://www.microsoft.com/downloads/details.aspx?familyid=0856eacb-4362-4b0d-8edd-aab15c5e
04f5&displaylang=en
- After the installation is completed, click [SETTING…] in the HOME WEATHER display. Then click [SET
LOCATION] to enter your home city location on the PC program.
- After setting your home location, 4-day forecast of your home city will be updated on your PC program
automatically via the Internet. You may click [UPDATE FORECAST] anytime to update the forecast display
on the program.
NOTE: Refer “TROUBLESHOOTING” section if you have problem displaying 4-day forecast information on your
PC program
ESTABLISH RF CONNECTION WITH MAIN UINIT
- Before setting up the RF connection, please ensure that you have successfully received 4-day forecast on
your PC program for your home city
- Place the PC transmitter & main unit away from metal & source of interference such as PC monitor, mobile
phones, appliances, TV etc. It is recommended to start with a short distance (eg. within 0.5 meter) between