User's Manual
17
all the 7-Day forecast data from the internet server, especially if you
have multiple locations setup. Press the SEARCH button on the
back of the Receiver to change its display message to “Searching
for PC”, then click “Send to Receiver” in the Weather FXi window.
The Transmitter LED should light, then blink as the updated data
is sent, and the Receiver display should indicate “PC Found...”
4. Be sure all 4 batteries in the Receiver are fresh. Replace the
batteries when the low battery indicator appears.
5. If the toolbar icon for the Weather FXi program disappears (in
the lower right of your PC screen), the application was terminated
and is no longer accessing the forecast from the internet. Restart
the program again. Instead of exiting the program if you don’t want
its window open, click the “-” on the top right of the application
window. To restore the Weather FXi window, right click its icon in
the system tray on the bottom right of your PC screen, and then
click “Open”.
6. In the rst few minutes of RF reception from the USB Transmitter,
the Receiver may show data on only part of the screen-this is
normal. The rest of the screen display data will gradually appear
in the next 10 minutes or more. If you have waited 1 hour or more
without seeing the rest of the weather data, shorten the distance
between the Transmitter and Receiver, also check the Receiver’s
battery condition. Then repeat the setup procedure in the
TRANSMIT DATA FROM PC SOFTWARE TO THE RECEIVER section.
7. If the RF indicator is showing full strength (
) but one or
more of the next 3 days’ forecast is missing on the Receiver and
Weather FXi program screen, your PC may be oine, or the
internet connection was interrupted earlier. Connect your PC to
the internet again to receive the latest forecast update.
960900C Weather FXi 7-Day 1LIM.indd 17 2/6/09 11:01:48 AM