User's Manual

LOW BATTERY INDICATION
An easy-to-read low battery indication symbol is featured on the Main Unit and the USB transmitter. If necessary,
simply replace batteries, and then follow the setup procedure “GETTING STARTED” in the beginning of this
booklet.
Low battery indicator symbol
Main Unit:
USB transmitter:
Below the icon
NOTE:
Just as you established the connection for the first time during original installation, you are required to set up the
RF connection between the USB transmitter and Main Unit after battery replacement (Example: Press [PC Search]
on the Main Unit, then press [TRANSMIT] button on the USB transmitter). Please refer to “ESTABLISH RF
CONNECTION WITH MAIN UNIT” section for details.
USB TRANSMITTER
Press [PC Search] on the Main Unit and then press [TRANSMIT] on the USB transmitter to enforce transmitting
RF weather data and set up the RF connection with the Main Unit (See “FOR YOUR HOME COMPUTER: USB
TRANSMITTER & PC PROGRAM INSTALLATION” section to set up the USB transmitter).
NOTE:
- Flip the antenna into vertical position for optimum transmission range.
- To run the PC program, ensure that your USB transmitter is connected properly to the PC through a USB port.
- When weather data is transmitted from the USB transmitter, the red LED light will flash.