User's Manual

ESTABLISH RF CONNECTION WITH MAIN UINIT:
- Ensure that you have successfully received a 5-Day forecast on your PC program (for your home city) before
setting up the RF connection.
- Place the USB transmitter and Main Unit away from metal and any source of interference such as a PC
monitor, mobile phones, appliances, TV, etc.
- It is recommended to start with a short distance (Example: Within 2 ft.) between the two units for initial RF
setup. Once the RF connection is established, place the Main Unit within the effective transmission range
from the transmitter. Shorten the distance if necessary for best reception.
- Flip the antenna into vertical position.
- To search for RF signal from a new USB transmitter, press [PC SEARCH] button on the Main Unit repeatedly
until the RF icon
flashes.
- Press [TRANSMIT] button on the USB transmitter to enforce transmitting RF weather data to the Main Unit.
- Once the RF connection is established between the Main Unit and USB transmitter, the RF icon “
“ with
full strength will appear on the Main Unit. In the first few minutes of the RF reception, the Main Unit may be
showing data on one part of the screen and this is normal. The rest of the screen display data will gradually
appear within the next 10+ minutes.
NOTE:
- If you have waited over thirty minutes and have yet to see the rest of the screen, shorten the distance
between the USB transmitter and Main Unit, check the battery levels and repeat the setup procedure above.
- If it continues to fail, try removing the USB connection and all batteries from the USB transmitter. Reinstall the
batteries and then reconnect the USB connection again. Repeat above procedure to set up the RF connection.