User's Manual

Bluetooth Candle Light Speaker User Manual
Candle LED Light with flickering effect
Slide the [LIGHT ON/OFF] switch to turn on or off the candle LED light
Play from a Bluetooth device
Note: The effective operation range between the speaker and your Bluetooth device is
approximately 10 meters (33 feet) line of sight maximum
- Slide the [MUSIC ON/OFF] switch to “ON” to turn on the speaker
- The blue LED indicator will flash
- Activate the Bluetooth function in your Bluetooth device
- Select “BT SPEAKER” on your Bluetooth device for pairing
- When connected, the blue LED indicator stays steadily on
- Start music play on your Bluetooth device
- Adjust volume on your Bluetooth device or press the [+] or [-] button on the speaker
- Press [Play/Pause] button on the speaker to play or pause music
- Slide the [MUSIC ON/OFF] switch to “OFF” when the speaker is not in use for power
saving
Play from an external device
- Slide the [MUSIC ON/OFF] switch to “ON” to turn on the speaker
- Connect your speaker with an external device through a 3.5mm cable (not supplied)
- Start music play on your device
- Slide the [MUSIC ON/OFF] switch to “OFF” when the speaker is not in use for power
saving
Power Supply
The speaker operates on built-in rechargeable battery
To recharge the built-in battery, connect micro USB socket with PC through supplied USB
cable
Charging: Red LED indicator turns on
Fully Charged: The red LED turns green when it is fully charged