User's Manual

DIGITAL THERMO SENSOR (MODEL NO. W044) OWNER'S MANUAL
Thank you for purchasing the new generation electronic thermo sensor. Designed
and engineered with the state-of-art technology and components, this instrument will
provide accurate and reliable measurement of outdoor temperature and humidity,
and a 433MHz RF communication with your weather station. Read this manual
carefully to full explore the features and functions of the new product.
Name and Functions of Switch and Buttons:
CH Select Channel 1,2,3
TX Force transmission of RF signal
C/F Select the reading between C and F
BATTERY INSTALLATION
Lift off the bracket stand, loose the 4 screws with a small screwdriver, insert 2 pcs
AAA batteries according to the polarity indicated. Replace the cover and tighten
the 4 screws.
SETTING UP THE WIRELESS THERMOMETER:
• For the first installation, always insert batteries to the home unit and then the
remote sensor.
• Set Channel 1 for the first remote sensor. Set channel 2 and channel 3 for the
additional 2nd and 3rd sensors.
• Press the Tx button on the back of remote sensor to verify the RF reception.
C/ F SELECTION
Press “C/F“ to select degree C/ degree F on the LCD display.
LOW BATTERY INDICATION
Low battery indication is available for the remote sensors. Replace the batteries and
follow the setup procedure as mentioned in this instruction manual if the low battery
indicator is shown.