User's Manual

ManualsBrandsAnsen Electronics ManualsElectronicsRF WIRELESS TRANSMITTER / LONG RANGE THERMO SENSOR

2752 Preliminary Instructions (W132-2)

Items Required for Installation and Set Up

Items included in this package:

1. Home Receiver Unit (an indoor unit which displays temperature and other readings)

2. Remote Wind Gauge Sensor (an outdoor sensor unit which transmits wind, temperature &

humidity data to the receiver unit)

3. Mounting hardware for the Wind Gauge Sensor (2 “U”-shaped metal plates, 4 sets of Hex

screws & nuts)

4. Instruction manual

Additional items needed for installation (not included):

1. A 1” to 1 ¼” diameter mast and hardware (if mounting the Wind Gauge Sensor on a roof or

other structure)

2. A small Phillips screwdriver (for the battery compartments and wind vane screws)

3. A Hexagonal Key screwdriver (for the remote Wind Gauge Sensor base screws)

4. A total of 4 AA batteries (Lithium batteries are recommended for the outdoor Wind Gauge

Sensor, as lithium batteries will last longer and thus will not need to be replaced as often as

alkaline batteries)

Description of Parts

Main Features & How to Access Functions

1 - LCD Readout (Receiver Unit):

Line 1: Displays Outdoor Temperature and Humidity, Heat Index, Wind Chill, and Wind Speed &

Direction.

Line 2: Displays indoor temperature.

Line 3: Clock displays current time and date.

2 - LED Indicator (Remote Wind Gauge Sensor):

Flashes when remote Wind Gauge Sensor transmits a reading.

3 - Multi-Function Button (Receiver Unit):

A) “CHANNEL” Button

Press to view the readings of channel 1, 2, 3 or auto scroll (which will show each display for 10

seconds). Press and hold 3 seconds to search for a remote sensor signal.

B) “MEMORY” Button

Press once to view maximum temperature, humidity, heat index, and wind speed readings. Press

again to view minimum readings. Press again to return to current readings.

While the min or max reading is displayed, press and hold for 3 seconds to clear the min or max

memory.

C) “UNIT” Button

Press to toggle between wind speed measurement displays: miles per hour (mph), kilometers per

hour (km/h), meters per second (m/s), knots, or Beaufort (bft).

D) “WIND” Button

Press to display average wind speeds and gust wind speed.

4 – “Backlight” Button (on top of Receiver Unit):

Press to illuminate the receiver’s LCD screen with an extended backlight.

5 – “Clock” button (on back of Receiver Unit):

Press and hold 3 seconds to enter Clock & Calendar Setting mode.

Summary of content (9 pages)

PAGE 1
2752 Preliminary Instructions (W132-2) Items Required for Installation and Set Up Items included in this package: 1. Home Receiver Unit (an indoor unit which displays temperature and other readings) 2. Remote Wind Gauge Sensor (an outdoor sensor unit which transmits wind, temperature & humidity data to the receiver unit) 3. Mounting hardware for the Wind Gauge Sensor (2 “U”-shaped metal plates, 4 sets of Hex screws & nuts) 4. Instruction manual Additional items needed for installation (not included): 1.
PAGE 2
6 – “Up” button (on back of Receiver Unit): Press to advance settings one step forward. Press and hold 3 seconds to fast advance. 7 – C/F Button (on back of Receiver Unit): Press to select °F or °C temperature scale. 8 - Battery Compartments (On back of Receiver Unit and on top of Wind Gauge Sensor base): The home receiver unit and remote Wind Gauge Sensor each use 2AA batteries.
PAGE 3
Note: The effective range is vastly affected by the building materials and where the receiver and remote units are positioned. Try various set ups for the best results. Shorten the distance between receiver and remote units when necessary. Important: Though the remote unit is weather proof, it should never be submerged in water. It is recommended to perform a transmission test before permanently mounting the remote Wind Gauge Sensor unit, in case it needs to be moved.
PAGE 4
3. A soft ground location in a yard (again, the more open the area, the better the wind accuracy, as a house or trees may block some wind gusts). To mount the Wind Gauge Sensor to a mast, you will need: - A 1” to 1 ¼” diameter mast (not included). - Hardware to fasten the mast to the mounting location (not included). 1. If necessary, mount and ground a mast as directed in the instructions provided by the mast (not included). 2. Hold the Sensor base up against the mast (see illustration).
PAGE 5
needs to be pointing north first, otherwise the wind direction data transmitted to the home receiver will be incorrect. Important: The same Wind Direction calibration procedure (steps 2 to 5) is needed for the first set up and after every battery replacement. 1. Mount the Wind Gauge Sensor in a proper location as previously described. If the batteries are still in the sensor, open the battery compartment cover and remove the batteries. 2. Use the compass on the top of the Sensor to determine due north.
PAGE 6
9. When transmission connection is established, the respective temperature and humidity of the selected remote channel will appear on the home receiver's LCD screen. Note: If dashes are still displayed for that channel on the receiver unit, press the Tx button again to send another transmission. 10. Press the “CHANNEL” button to toggle between indoor and remote sensor temperature/humidity displays.
PAGE 7
The Wind Direction is indicated by the arrow pointer icons surrounding the Wind Speed reading. The receiver displays 16 wind directions. Eight of the wind directions are marked on the display: N for north, S for south, SW for Southwest, etc. If the wind direction is between North and Northwest, for example, the arrow will point to the dot between the two directions. The Wind Speed appears in the center of the arrow icons.
PAGE 8
3. Check to make sure the transmission path is clear of obstacles and interference. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 9
10. Do not mix old and new batteries. Do not dispose of batteries in fire. Batteries may explode or leak. Remove the batteries if the units will not be used for a long period of time. 11. Always read the instruction manual before operating this product. Important: Though the remote Wind Gauge Sensor is weather proof, it should be placed away from direct sunlight, rain, snow and should never be submerged in water.