User's Manual

CALENDAR MODE
Press [LEFT] / [RIGHT] to show the calendar of the previous or next month
Press [UP] / [DOWN] to show the calendar of the previous or next year
To set the calendar, enter SETUP mode for setting
SETUP MODE
Press [UP]/[DOWN] to move to your setting item. Press [LEFT]/[RIGHT] to select the setting and press [ENTER] to confirm the
setting.
Language: Select between English, Dutch & French
Slideshow Time: Select between 3s, 5s, 15s, 1 min, 15 min & 1 hour for photo slideshow mode
Transition Effect: Select the transition effect of the photo slideshow mode
Photo repeat mode: Select between random, manual or repeat all for the photo slideshow mode
Display mode: Select the photo display mode (cinema, stretch, crop)
On/Off Timer 1 - On: Adjust the first automatic power on time in HH:MM; enable or disable
On/Off Timer 1 - Off: Adjust the first automatic power off time in HH:MM; enable or disable
On/Off Timer 2 - On: Adjust the second automatic power on time in HH:MM; enable or disable
On/Off Timer 2 - Off: Adjust the second automatic power off time in HH:MM; enable or disable
(For power saving, you can select when to turn on or off the photo frame
automatically throughout the day using the On/Off timer 1 or 2)
Brightness: Select the brightness of the display from level 1 to 16
Contrast: Select the contrast of the display from level 1 to 16
Saturation: Select the saturation of the display from level 1 to 16
Radio-Controlled Reception: (This function is not available for this unit. Please keep this setting to “Off”)
Automatic - search for radio-controlled daily at around 2:03am
Search now - start searching for radio-controlled clock signal
Off – turn off the daily radio-controlled clock reception
Time Zone: Adjust the clock to your local time using the time offset setting
Time/Date: Adjust the calendar and time
Calendar Display Format: Select between Day/Month or Month/Day format
Time Format: Select between 24 & 12 hour format
Alarm: Adjust the alarm time and enable/disable the alarm
Wireless Sensor Reception: Automatic – default RF reception mode
Search now – Search for remote sensor immediately
Temperature Unit: Select between degree C & F for temperature
Weather Forecast: Select between sunny, partly cloudy, cloudy, rainy & stormy
Rainfall unit: Select between mm & inch
Wind unit: Select between m/s, knots, mph & km/h
Sea Level Pressure: Adjust the sea level pressure for your local area
Pressure Unit: Select pressure unit between hPa, mmHg, inHg & mb
Remote Channel Display: Automatic – Show the channel(s) being registered
Channel 1 only – Shows only channel 1 reading only
Channel 2 only – Shows only channel 2 reading only
Channel 3 only – Shows only channel 3 reading only