Quick Start Guide

The wireless NVR system consists of two parts. One is the NVR connected to the

monitor, and the other is the IP cameras installed. Both NVR and IPC need

independent power supply to work. Users can watch the real-time video captured

by each IPC on the monitor. These images will also be saved in NVR for later

playback at any time.

How the System Works

To ensure that the product can work normally, we recommend that you connect

the whole system before installation to see if there is any damage during

transportation.

How to connect the system:

1. Connect NVR to router using a network cable.

2. Connect monitor to NVR via HDMI or VGA port(VGA cable is not included).

3. Connect the included USB mouse to the top USB port of NVR.

4. Connect NVR to power supply (12V power adapter)

6. The monitor will display live video of the camera.

5. After the system starts, connect camera to the system (maximum support 8

channels).

How to Connect the System