Instruction Manual

EN
16
Symbols
Read the instructions.
The product is not dimmable.
Approved in accordance with the
relevant directives.
Recycle end-of-life product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage 230 V
~
50 Hz
Output 100W
Luminous ux 16000 lm
Energy class C
Colour temperature 4000 K
Life span 50000 h
Dimmable No
Protection rating IP65
Power factor 0.90
Weight 2.51 kg
INSTALLATION
NOTE:
• Always disconnect the power supply
before installation.
• Cables must not touch the product
because the high temperature of the
light can damage them, and cause a re
risk.
1. Disconnect the mains voltage.
2. Screw in the eye screw and tighten.
FIG. 1
3. Connect the wires:
– Black: Live wire.
– White: Neutral wire.
SAFETY INSTRUCTIONS
• Intended for indoor and outdoor use.
• The electrical installation must comply
with local regulations. Consult an
authorised electrician if in doubt.
• Always follow the electrical specications
on the product labelling.
• Always disconnect the power supply
before installation, connection and
service.
• Do not use the product if the glass cover is
damaged.
• The light must be connected to an
earthed power supply on installation.
• If the power cord to this light is damaged
it must only the replaced by the
manufacturer or a service technician, or
other qualied person, to ensure safe use.
• Before drilling in walls, ceilings or oors,
check that there are no concealed
electrical cables or piping.
• The product must only be installed by
qualied personnel.
• Use a suitable hanger for the installation.
• The hook must be able to support at least
10 kg (four times the weight of the
product). The manufacturer cannot be
held responsible for any damage caused
by incorrect installation.
• The light source must be replaced by an
authorized service representative or other
qualied personnel.
ELECTRICAL SAFETY
New installations and extensions to existing
systems should always be carried out by
an authorised electrician. If you have the
necessary experience and knowledge
(otherwise contact an electrician), you can
replace power switches and wall sockets,
t plugs, extension cords and light sockets.
Incorrect installation can result in fatal injury
and the risk of re.