User manual

> The device is not to be used by children or people with reduced physical,
sensory or mental capabilities. In addition, novice users who have not fully
read these instructions should be supervised or given instruction before use!
> If the safety instructions are not followed, it may lead to damage to the
device or batteries and could cause injury to the user!
> We recommend the use of ANSMANN rechargeable batteries with this
product!
FUNCTIONAL OVERVIEW
> Desktop charger for 1-8 AAA or AA NiMH/NiCd cells
> Including 1 USB charging output (5V / 1000mA)
> The battery’s charging condition is not important prior to charging
> Charging starts automatically when a battery is inserted
> Discharging of the batteries before charging is possible
> Microprocessor controlled charging and monitoring of the charging status
> Battery full detection (-dV)
> Automatic changeover to trickle charge
> Multiple over-charging protection per cell
> Individual supervision of each cell
> Reverse polarity protection
> Faulty cell detection / accidental alkaline insertion detection
> Multi-coloured LED indicators show the battery status for each charging slot
> For worldwide use (100-240V AC / 50-60Hz)
OPERATION
Please insert the mains input plug (included) so that it connects to the two
power contacts located on the power supply and push the plug until it clicks in
to place (see illustration [1]). Please ensure that you hear the input plug click
into the power supply to ensure that the unit is safe to use. Connect the power
supply to the charger with the output plug. Finally, connect the power supply to
the mains (100-240V AC 50-60Hz).