User manual

15
Push out the Switzerland / Italy plug until it locks into place (as described
above) (1). Changing from the Italian to the Swiss plug (all three pins must
be aligned in a row): Push middle pin to the left with slight force until you
hear a distinct “click” (2). Then push the pin on the top to the right (3).
The adapter is not ready for use until all three pins are in the vertical
position. To change to the setting for Italy, simply reverse the procedure (4).
Schuko
USING THE SCHUKO ADAPTER
(French or German Plug)
Remove the integral Schuko adapter from the Ansmann All-in-One-3 World
Travel Adapter and plug it directly into the mains wall socket. Plug in your
device’s mains plug directly into the Schuko adapter. You do not need to
use the rest of the All-in-One-3 World Travel Adapter for this connection.
Switzerland
Deutschland
manual_all_in_one_3_10-04.indd 15 12.05.10 16:45