Safety data sheet

No.5
2/6
3.
Composition and Informations on Ingredients
Each cell consists of a hermetically sealed metallic container containing a number of chemicals and
materials of construction of which the following could potentially be hazardous upon release.
4. First Aid Measures
In case of accumulator breakage or burst, please evacuate employees from the contaminated area and ensure
maximal ventilation in order to break-up corrosive gas, smoke and unpleasant odors.
If it occurs, by accident, following measures must be taken:
Inhalation Remove from exposure, rest and keep warm.
In severe cases obtain medical attention.
Skin Contact Wash off skin thoroughly with water. Remove contaminated clothing and
wash before re-use. In severe cases obtain medical attention.
Eye Contact Irrigate thoroughly with water for at least 15 minutes.
Obtain medical attention.
Ingestion Wash out mouth thoroughly with water and give plenty of water to drink.
Obtain medical attention.
Further treatment All cases of eye contamination, persistent skin irritation and casualities who
have swallowed this substance or been affected by breathing its vapours should
be seen by a doctor.
Styrene Butadiene
< 5%
9003-55-8
Rubber (SBR)
n/a
n/a
11
F (powder)
10-15
F (powder)
n/a
n/a
7429-90-5
Aluminium (Al)
2 - 10%
Carbon (C)
10 - 30%
7440-44-0
Copper (Cu)
2 - 11%
7440-50-8
25 - 35%
EMC (Ethyl Methyl Carb.)
DEC (Diethylcarbonate)
Fluoride (PVDF)
stainless steel
n/a
n/a
(Graphite)
n/a
1 - 3%
F
24937-79-9
n/a
21324-40-3
T
(propietary)
metall oxide
CAS No.
Content
Ingredient
n/a
n/a
< 5%
single cells and multi-cell battery packs
Hazard Symbols
for
Material - Safety - Data Sheet (MSDS)
DMC (Di Methyl Carbonate)
623-53-0
105-58-8
96-49-1
EC (Ethylene Carbonate)
141-78-6
EA (Ethyl-Acetate)
Phosphate (LiPF
6
)
compounds
Lithium-Hexa-Fluoro
Polyvinylidene
20 - 50%
e.g. Li-Ni, Li-Mn,
616-38-6
22, 24
34
10
Ansmann Lithium-Ion Batteries
Li-Co, Li-FePo
10 - 20%
Organic Solvents
Classification
R Phrases
Xi, F
Xi
Xi
11, 36, 66, 67
41
11
10, 36, 37, 38