Operating instructions

OPERATION

If you want to use the torch, disconnect the bat-

tery pack from the mains. By pushing the slide

switch towards the head of the lamp, the torch is

switched on. The integrated magnet at the lower

part of the torch allows the lamps to be stuck to

metallic surfaces when in operation.

Attention: The bulb is sensitive to shocks.

If the lamp drops, the thin lighting ﬁla-

ment in the bulb may break. Please re-

charge the lamp early enough when in

use. Never leave the lamp switched on

with empty batteries as this may cause

damages to the battery pack.

REPLACING THE BULB

Turn the head of the torch anticlockwise and

remove the reﬂector and the bulb. The bulb

can now easily be replaced. A spare bulb is

attached to the inside of the lamp head.

ACCESSORIES

Includes: blue carrying strap, 230 V power supply.

Charging electronics and 1,200 mAh/2.4 V batte-

ry pack are integrated in the torch. A mains adap-