Instruction manual

GETTING STARTED

• Unpack the ANSR: HALO, the instruction manual, and

AC/DC power adapter.

• Read all instructions before using your ANSR: HALO.

• Prior to initial use, charge the device. Use only the

AC/DC power adapter provided with the device. Plug

the power adapter jack into the bottom of the device and

connect to an electrical outlet. Charge ANSR: HALO fully,

until all three white indicator lights are illuminated. This

will take approximately two hours. Unplug the device once

it is fully charged. The ANSR: HALO will not operate

while plugged into an electrical outlet.

ACTIVATING THE LIGHT

• For best results, wash your face carefully with a

quality skin care product before using the light.

• Activate the light by pressing the power button once.

The red and infrared LED lights will illuminate along with

the battery level indicators. Although not visible (to the

Press Power Button